| Customization: | Available |
|---|---|
| Condition: | New |
| Customized: | Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Name | Specs | Qty |
| 1 | Three Phase Induction Motor | Power: 370W, Voltage: 380VAC,Speed: 1500 rpm, Connection: Δ & Υ | 1 pcs |
| 2 | Three Phase Synchronous Generator | Power: 300W, Voltage: 415VAC, Speed: 1500 rpm, Connection: Y | 1 pcs |
| 3 | Single Phase Synchronization Generator Module | Power: 300W, Voltage: 220~240VAC, Speed: 1500 rpm | 1 pcs |
| 4 | Three Phase Transformer Module | Transformer for feeding the transmission line model 415V. Scale factor 1:600 for secondary current and voltage. Nominal Power: 600~800VA Primary: 3 x 400 V winding with tapping at 220~240V, can be switched to star or delta connection delta stabilizing winding can be connected. Secondary: 3 x 380 V winding with tap-pings at +5%, -5%, -10%, -15% in star connection, various star point connections possible |
1 pcs |
| 5 | Transmission Line Module | Measuring steady state operating conditions. Quad bundle 4 x 240/40, with surge impedance 220~240 and natural load 300 MW, length 250 km. Resistance: 15 Ohm, 10 Ohm, 5 Ohm Inductance: 200 m H, 125 m H, 75 m H Open Capacity: 5 μ F, 3 μ F, 2 μ F |
1 pcs |
| 6 | Inverter Module |
3 phase asynchronous motor speed control by PWM technique. The Torque and Speed are able to be constant via the unit to easy control in testing operation during loads change. Input Voltage: 380V/50Hz, Output Voltage: 380V, Out Frequency: 1-300Hz, Power: 1.5 Kw |
1 pcs |
| 7 | Three Phase Power Supply Module | Fixed and variable AC supplies. Provided with start stop/stop push bottom EMO. Three Phase AC Adjustable Output: 3x 380V: 6A Three Phase AC Fixed Output:220/380V: 10A Power Requirement: 220/380V, 50Hz |
1 pcs |
| 8 | Resistive Load Module |
Compose of three resistances with possibility to connect in star/delta or parallel. Controlled by three switches with 7 steps variable per phase. Power: 1000 watt Voltage: 380/220Volt (Star/Delta) |
1 pcs |
| 9 | Inductive Load Module |
Compose of three inductances with possibility to connect in start / delta or parallel. Controlled by three switches with 7 steps variable per phase. Power: 800VAR Voltage: 380/220Volt (Star/Delta) |
1 pcs |
| 10 | Power Circuit Breaker Module |
3-phase ON-OFF switch with auxiliary contact (NC) for transmission line. Module can be controlled manually using ON/OFF pushbutton or externally via switching contact, 4 mm sockets. |
1 pcs |
| 11 | Earth Fault Compensation Module |
Inductance with 20 tapping's for earth fault compensation in the transmission line module (Petersen coil). Inductance L: 0.05~2 H Rated voltage: 220V, 50 Hz Rated current: 1 A |
1 pcs |
| 12 | Capacitive Load Module |
Compose of three capacitances with possibility to connect in star/delta or parallel. Controlled by three switches with 7 steps variable per phase. Max Power: 800 VAR Voltage : 380/220Volt (Star/Delta) |
1 pcs |
| 13 | Transmission Line Capacitor Module |
3-phase in star connection, 2.5 μF each, corresponds to 50 % of the operating capacitance of transmission line module. | 1 pcs |
| 14 | Excitation Voltage Controller Module | DC power supply unit suitable to supply 0-240VDC, 0-2A adjustable for excitation voltage in synchronous as generator operation. | 1 pcs |
| 15 | Three Phase Contactor With Overload Relay Module | Voltage: 380VAC Range: 0-2 A Coil: 220VAC |
1 pcs |
| 16 | Electrical Meter |
Measurement: V, KV, Hz, A, KA, S, KW, KVAR, KVA, KWH, KVRH | 1 pcs |
| 17 | Kilowatt Hour Meter |
Speed: 1200 turn/1k W/Hour, Accuracy : Class 1.5 or latest | 1 pcs |
| 18 | Simulate Switch Board Module | Rated voltage: 220VAC, off Push Button | 1 pcs |
| 19 | AC Voltmeter & AC Ammeter | Voltage Ranges: 5V, 50V, 250V, 1000V Current Ranges: 1A, 5A, 25A |
1 pcs |
| 20 | Pulley And Rubber Coupling | Come with synthetic rubber coupling 12-teeths coupling Suitable for all model of electric machine module |
1 pcs |
| 21 | Connecting cable | For connecting junction point 4 mm | 1 set |
){kind=link}