| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Name | Specs | QTY |
| 1 | Transformer | Output: AC: 3 x 90V/1.5A with 3 center taps 45V DC: 220V/1 A Input: AC380V, 50Hz 3-Phase |
1 |
| 2 | Control unit six pulse | Single pulse or pulse train operation Phase shift can be set for various natural commutating points: 0˚,30˚,60˚ Output: Synchronize Voltage: 1-440VAC Control Voltage: 0-+10VDC Input: ±15VDC |
1 |
| 3 | Four channels isolation amplifier | Channels can be switched on or off individually Frequency Range: DC…80kHz Voltage: Max 620VDC/440VAC Overdrive indication with LEDs 4mm Safety Sockets Input voltage: DC15V |
1 |
| 4 | Fault simulation phase control | A total of 20 faults from the following categories can be switched on: Interruption/Short-circuit/Faulty assembly/Faulty components |
1 |
| 5 | Control unit two pulse | Single pulse or pulse train operation Phase shift can be set for various natural commutating points: 0˚, 30˚ Output: Synchronize Voltage: 1...250VAC Control Voltage: 0…+10VDC Input: ±15VDC |
1 |
| 6 | Thyristor with turn off circuit | Main Thyristor and Turn-off Thyristor: VDRM: Max 800V IT AV: Max 13A TQ: 35µs Free-wheeling Diode: VRRM: Max 1000V IT AV: Max 8A Shunts: 4 x 0.1 ohm, 1% Turn-off Capacitor: 4pF, 450V Ring-around reactor: 1 m H |
1 |
| 7 | Control unit PWM/PFM | Operation can be selected with the following control modes: Pulse Width Modulation (PWM) and Pulse Frequency Modulation (PFM) Control voltage: 0…+10VDC Pulse Width Modulator: Frequency Ranges: 20…200Hz / 0.2…2kHz/2…20kHz Pulse Duty Factor : 0…0.95 Pulse Frequency Modulator: Pulse Duration Ranges: 5…50µs / 50…500µs / 0.5…5ms Frequency: 20Hz…20kHz Output Amplifier: Sustained short-circuit proof Indication of switching state via 2 LEDs INHIBIT input Input: ±15VDC |
1 |
| 8 | Reference variable generator | Output: (selectable using bridging plug) 0…+10VDC -10VDC…+10VDC Input: ±15VDC |
1 |
| 9 | Trigger point limiter | LED indication for overlap Rectifier Stability Limit: 0˚…180˚ Inverter Stability Limit: 180˚…0˚ Input: ±15VDC |
1 |
| 10 | IGBT | Insulated gate bipolar max 1000V Transistor max 10A |
1 |
| 11 | Single phase rectifier | Periodic Repetitive Peak Reverse Voltage: 500V On-State Current: 10A |
1 |
| 12 | Fuse | Rated voltage:415VAC Protection Fuse 2A x 3 units |
1 |
| 13 | Power diode | Max 1000V ; Max 10A | 1 |
| 14 | Triac | Max 800V | 1 |
| 15 | Capacitor unit | Nominal Capacitance: 2 x 1000µF Nominal Voltage:415V |
1 |
| 16 | Rectifier | Nominal Voltage: 3 x 400V Nominal Current: 10A Surge Forward Current: 300A |
1 |
| 17 | MOSFET | Max 500V; Max 10A; 0.6Ω | 4 |
| 18 | BULB socket | Incandescent Lamp x 3 units Input: AC 240V, 50Hz 1-Phase |
1 |
| 19 | Resistor load | Resistor 100Ωx 3 units Protection Fuse 1 A x 3 units |
|
| 20 | DC power supply | Two red LED (Voltage monitor) 4 mm Sockets Output: 0-+15V Input: AC 240V, 50Hz 1-Phase |
1 |
| 21 | Thyristor | Thyristor x 6 units Protection Fuse 1.5A x 6 units Max 1000V; Max 12A |
1 |
| 22 | AC voltmeter | Measurement Mode: AC Voltage Ranges: 5V,50V,250V,1000V |
2 |
| 23 | AC ammeter | Measurement Mode: AC Current Ranges:1 A, 5A, 25A |
2 |
| 24 | DC voltmeter | Measurement Mode: DC Voltage Ranges: 5V,50V,250V,1000V |
2 |
| 25 | DC ammeter | Measurement Mode: DC Current Ranges:1 A,5A, 25A |
2 |
| 26 | RLC load | Resistor 1KΩ Inductor 50m H 2.5A with tap at 12.5m H Capacitors 4/8/16µF, 450VAC |
1 |
){kind=link}