Didactic Electronic Lab Equipment Power Electronics Automation Control Trainer

• Warranty: 1 Year
• Condition: New
• Customized: Customized
• Certification: ISO9001
• Power Supply: Three Phase, AC380V/50Hz
• Dimension: 1510*610*1810mm
• Model NO.: GTET-1013
• Transport Package: Sea Worth Package
• Specification: about 100kg
• Trademark: GTEE
• Origin: Guangzhou, China
• Production Capacity: 1000sets/Month

Product Description

Didactic electronic lab equipment power electronics automation control trainer
PN: GTET-1013
Picture for reference:

Technical parameter
Dimension: About 1510mm × 610mm × 1810mm
Power supply: Three phase, AC380V/50Hz
Weigh: About 100kg

Product description
The Power Electronics Training device has been designed to control of electrical energy 
With the greatest efficiency possible. In fact, it allows the implementation of theoretical
practical courses, for the study of power electronics.

Product composition

No.	Name	Specs	QTY
1	Transformer	Output: AC: 3 x 90V/1.5A with 3 center taps 45V DC: 220V/1 A Input: AC380V, 50Hz 3-Phase	1
2	Control unit six pulse	Single pulse or pulse train operation Phase shift can be set for various natural commutating points: 0˚,30˚,60˚ Output: Synchronize Voltage: 1-440VAC Control Voltage: 0-+10VDC  Input: ±15VDC	1
3	Four channels isolation amplifier	Channels can be switched on or off individually Frequency Range: DC…80kHz Voltage: Max 620VDC/440VAC Overdrive indication with LEDs 4mm Safety Sockets Input: AC 240V, 50Hz 1-Phase	1
4	Fault simulation phase control	A total of 20 faults from the following categories can be switched on: Interruption/Short-circuit/Faulty assembly/ Faulty components/Input: AC 240V, 50Hz 1-Phase	1
5	Control unit two pulse	Single pulse or pulse train operation Phase shift can be set for various natural commutating points: 0˚, 30˚ Output:   Synchronize Voltage: 1...250VAC Control Voltage: 0…+10VDC Input: ±15VDC	1
6	Thyristor with turn off circuit	Main Thyristor and Turn-off Thyristor: VDRM: Max 800V IT AV: Max 13A TQ: 35µs Free-wheeling Diode: VRRM: Max 1000V IT AV: Max 8A Shunts: 4 x 0.1 ohm, 1% Turn-off Capacitor: 4pF, 450V Ring-around reactor: 1 m H	1
7	Control unit PWM/PFM	Operation can be selected with the following control modes: Pulse Width Modulation (PWM) and Pulse Frequency Modulation (PFM) Control voltage: 0…+10VDC Pulse Width Modulator: Frequency Ranges: 20…200Hz / 0.2…2kHz/2…20kHz Pulse Duty Factor : 0…0.95 Pulse Frequency Modulator: Pulse Duration Ranges: 5…50µs / 50…500µs / 0.5…5ms Frequency: 20Hz…20kHz Output Amplifier: Sustained short-circuit proof Indication of switching state via 2 LEDs INHIBIT input Input: ±15VDC	1
8	Reference variable generator	Output: (selectable using bridging plug) 0…+10VDC -10VDC…+10VDC Input: ±15VDC	1
9	Trigger point limiter	LED indication for overlap Rectifier Stability Limit: 0˚…180˚ Inverter Stability Limit: 180˚…0˚ Input: ±15VDC	1
10	IGBT	Insulated gate bipolar max 1000V Transistor max 10A	1
11	Single phase rectifier	Periodic Repetitive Peak Reverse Voltage: 500V On-State Current: 10A Protection: Fast Acting Fuse With R-C-D suppressor circuit	1
12	Fuse	Rated voltage:415VAC Protection Fuse 2A x 3 units	1
13	Power diode	Max 1000V ;  Max 10A	1
14	Triac	Max 800V	1
15	Capacitor unit	Nominal Capacitance: 2 x 1000µF Nominal Voltage:415V	1
16	Rectifier	Nominal Voltage: 3 x 400V Nominal Current: 10A Surge Forward Current: 300A	1
17	MOSFET	Max 500V; Max 10A; 0.6Ω	4
18	BULB socket	Incandescent Lamp x 3 units Input: AC 240V, 50Hz 1-Phase	1
19	Resistor load	Resistor 100Ωx 3 units Protection Fuse 1 A x 3 units
20	DC power supply	Two red LED (Voltage monitor) 4 mm Sockets Output: 115VDC&+SVDC Input: AC 240V, 50Hz 1-Phase	1
21	Thyristor	Thyristor x 6 units Protection Fuse 1.5A x 6 units Max 1000V; Max 12A	1
22	AC voltmeter	Measurement Mode: AC Voltage Ranges: 5V,50V,250V,1000V	2
23	AC ammeter	Measurement Mode: AC Current Ranges:1 A, 5A, 25A	2
24	DC voltmeter	Measurement Mode: DC Voltage Ranges: 5V,50V,250V,1000V	2
25	DC ammeter	Measurement Mode: DC Current Ranges:1 A,5A, 25A	2
26	RLC load	Resistor 1KΩ Inductor 50m H 2.5A with tap at 12.5m H Capacitors 4/8/16µF, 450VAC	1

Training courses
1. Single-Phase Half-Wave Half Controlled Rectifier Circuit
2. Single-Phase Full-Wave Controlled Rectifier Circuit
3. Single-Phase Bridge-Type Controlled Rectifier Circuit
4. Single-Phase AC Booster Circuit
5. Three-Phase Bridge-Type Controlled Rectifier Circuit
6. Quenching Circuit Step-Down DC Chopper Module
7. MOSFET Step-Down DC Chopper Circuit
8. IGBT Step-Down DC Chopper Circuit
9. Passive Inverter Circuit
10. Fault Simulator
11. Connection Diagram



Packing&Shipping
Solid plywood box and normally ship by sea, but if the size is not big, also by air, FedEx or DHL, TNT and so on.

Company Profile

Guangzhou Guangtong Educational Equipment Co.,LTD is a well-known high-tech company, we participate in many international educational tenders and help our customer win the tender.

We are specialized in development and manufacturing of professional Educational Equipment including automotive teaching equipment, air conditioning and refrigeration teaching equipment, electrical and electronic teaching equipment, lift teaching, solar energy trainer, electric car training device and other vocational training equipment etc.
GTEE is located in Baiyun District, Guangzhou City and adjacent to Guangzhou Baiyun International Airport.

With our several years of design, development, manufacturing and international service experience and expertise, GTEE is growing up and developing very fast. We continuously focus on providing high quality products with competitive price and reliable after sale services for our overseas customers. We will response to our customers within 24 hours after get the feedback and requirements.

Show Room:

Customer Photos:

FAQ
Q: Are you trading company or manufacturer?
A: We are manufacturer.

Q: How long is your delivery time?
A: Depends on product quantity and stock. Please check with our sales team.

Q: What are your terms of payment?
A: Payment<=5000USD, 100% in advance.
Payment>=5000USD, 50% T/T in advance, 50% T/T balance before shipment.

Q: Do you offer aftersales support ?
A: Yes, of course, we will provide training materials together with the device, and also we can provide on-site training and installation if customer request. We also have technical engineer for online or remote support, and if within warranty, products parts damaged due to our quality problems, we will send parts via DHL to you for replacement for free as we seek long term cooperation with customers.

Q: How to have exclusive sales rights of GTEE?
A: Place order to GTEE, when the order amount reach certain level, GTEE and customer will negotiate about exclusive rights.
Or send your company profile to GTEE, after GTEE evaluation, start from general agents and gradually become exclusive agent.